Electronics Box

I previously had transformers and USB hubs and various pieces of electronics hanging off my tripod, and I wanted to add even more to make remote control easier. So I built a box to contain the electronics. It can be very helpful to see the various status lights to troubleshoot problems, so the box has a plexiglas door so everything is visible but protected. I also didn't want the contents to get too hot in the summer, so all transformers and power supplies are on the outside of the box. I put these all on top of the box to keep them away from the ground and any water.

The box is divided in the middle by a series of planks; the idea is to mount the various equipment so it can be seen through the door, and have the back part of the box contain the inevitable wire jungle. However, I was concerned that if I made the divider wall solid and just ran wires through it, I wouldn't be able to easily tell if anything decided to make a home in the back.